DIN EN 857 2SC

Recommended For: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Special Features: Qualified for double impulse cycles(400,000 cycles) comparing with standards-EN857 2SC/ISO 11237-1. Compact design,good flexibility. Smaller Bend Radius. Suitable for installation at narrow assembly space compared to 2SN series.
Tube: Black, oil resistant, synthetic rubber.
Reinforcement: Two braids of high-tensile steel wire.
Cover: Black, oilproof, Anti-abrasion&weather resistant, thin synthetic rubber.
Working Temperature:-40℉to +212℉(-40℃to +100℃)

Hose ID		Hose O.D.		Working Pressure		Min. Burst Pressure		Min. Bend Radius		Weight
(In.)	(mm)	(In.)	(mm)	(psi)	(MPa)	(psi)	(MPa)	(In.)	(mm)	kg/m	lb/ft
1/4	6.4	0.53	13.5	5800	40.0	23200	160	2.95	75	0.28	0.188
5/16	7.9	0.58	14.7	5075	35.0	20300	140	3.35	85	0.33	0.222
3/8	9.5	0.68	17.2	4785	33.0	19140	132	3.54	90	0.42	0.282
1/2	12.7	0.81	20.5	3990	27.5	15950	110	5.12	130	0.52	0.349
5/8	15.9	0.94	23.8	3625	25.0	14500	100	6.69	170	0.61	0.410
3/4	19.0	1.09	27.6	3120	21.5	12470	86	7.87	200	0.79	0.531
1	25.4	1.39	35.4	2395	16.5	9570	66	9.84	250	1.10	0.739

Products

DIN EN 857 2SC