DIN EN 857 1SC

Recommended For: Low-medium pressure,petroleum based fluids or glycol-water based fluids at high pressure.Such as mineral oils, fuels, hydrocarbons.
Special Features: Working pressure exceeds EN857 1SC standard requirements. Good flexibility,lower bend radius.Suitable for complex high pressure hydraulic circuits. Validated for 300,000 impulse cycles.
Tube: Black, oil resistant, synthetic rubber.
Reinforcement: One braid of high-tensile steel wire.
Cover: Black, oilproof, Anti-abrasion&weather resistant, thin synthetic rubber
Working Temperature:-40℉to +212℉(-40℃to +100℃)

Hose ID		Hose O.D.		Working Pressure		Min. Burst Pressure		Min. Bend Radius		Weight
(In.)	(mm)	(In.)	(mm)	(psi)	(MPa)	(psi)	(MPa)	(In.)	(mm)	kg/m	lb/ft
1/4	6.4	0.48	12.2	3265	22.5	13050	90	2.95	75	0.18	0.121
5/16	7.9	0.53	13.5	3120	21.5	12470	86	3.35	85	0.21	0.141
3/8	9.5	0.61	15.6	2610	18.0	10440	72	3.54	90	0.28	0.188
1/2	12.7	0.75	19.0	2320	16.0	9280	64	5.12	130	0.33	0.222
5/8	15.9	0.88	22.4	1885	13.0	7540	52	5.91	150	0.41	0.276
3/4	19.0	1.02	26.0	1525	10.5	6090	42	7.09	180	0.52	0.349
1	25.4	1.31	33.3	1275	8.8	5075	35	9.06	230	0.78	0.524

Products

DIN EN 857 1SC